Used for connecting external power supply to radio interface. Note external power is not required to power interface but using the external power the interface will trickle charge the headsets and power a VHF radio.
Wireless PTT for trikes & other aircraft. Attaches to the 'A' frame of any trike as per a standard cabled PTT - but without any wires attached. There is a small receiver unit to connect to the PTT connection of the aircraft radio interface. The PTT and receiver then replace the need for a cabled PTT. There is a small 12w volt battery in the PTT unit. Battery life is typically 2-4 years, depending on amount of use.
Auxiliary audio in and out lead, used for connecting MP3 player into radio interface or recording device to an Auxiliary audio out on radio interface. Used with a powered radio interface (MM005).
Connects to the MM005 Powered Radio Interface. This will provide the capability to have a second VHF/ PMR band radio in the aircraft. The standard lead terminates to a twin 3.5 & 2.5mm jack plug. A CT44 adapter can be used to convert this to a single 4 pole 3.5mm Jack plug. To transmit on the second radio press the PTT on the second radio and speak normally into your headset.
Converts a GA style headset to work with our powered radio interface (MM005). The adapter is also compatible with Lynx and Pilot Europe powered radio interfaces.
High power strobe system. The strobe can be connected from 9 - 80v AC or DC volts. Ideally connected to AC volts for aircraft with little spare power output. The power consumption is less than 500mA if connected to AC volts or 2Amp connected to DC volts.
High power strobe system. The strobe can be connected from 9 - 80v AC or DC volts. Ideally connected to AC volts for aircraft with little spare power output. The power consumption is less than 500mA if connected to AC volts or 2Amp connected to DC volts.
High power strobe system. The strobe can be connected from 9 - 80v AC or DC volts. Ideally connected to AC volts for aircraft with little spare power output. The power consumption is less than 500mA if connected to AC volts or 2Amp connected to DC volts.