The RAM-HOL-AP19 consists of a high strength composite holder and diamond hole pattern that will allow the attachment to all RAM components or mounts that contain the diamond adapter plate. Compatible and interchangeable with a wide range of popular RAM Mounting products, this holder is ready to compliment your iPhone 6 / 6s Plus.
The X-Grip® III consists of a composite spring loaded holder, expandable grip arms and additional bottom support. Easy access grip knobs located on the back of the holder allow for quick release of your tablet. The X-Grip® III expands and contracts for perfect fit of most 10" tablets with or without cases / skins, as well as some smaller tablets.
The RAM-HOL-AP18 consists of a high strength composite holder and diamond hole pattern that will allow the attachment to all RAM components or mounts that contain the diamond adapter plate. Compatible and interchangeable with a wide range of popular RAM Mounting products, this holder is ready to compliment your iPhone 6 & 6s.
Perfect for the new Apple iPad 3 and Apple iPad 1 & 2 as well as other tablets (see details below), the RAM Tab-Tite is a spring loaded, quick release holder. With interchangeable cup ends, you can fit the holder to your iPad for a near custom fit. This spring loaded design makes it easy to load and unload your iPad, along with keeping it secure while on the go.
The RAM-HOL-TAB12 consists of a spring loaded back plate and custom support cups for the iPad mini WITH skin, sleeve or case. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go.
The X-Grip III™ consists of a composite spring loaded The RAM-HOL-TAB17 consists of a spring loaded back plate and custom support cups for 10" screen tablets WITH heavy duty cases. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go.
Get the most out of your tablet with the RAM Tab-Tite™ universal holder. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. The spring loaded design makes it easy to insert and remove your tablet - see video at the bottom of the page showing how the holder works.
The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your mobile device behind foam pads and plastic. The perfect compliment to the modern sleek design of mobile electronics. Compatible and interchangeable with a wide range of popular RAM Mounting products within the 1" ball range.
The new RAM Multi-Pad™ is the perfect product to keep your busy life organized. Easily mounted in a variety of locations and ideal for your car, truck, or plane, the RAM Multi-Pad™ has many features you’d expect and others that will surprise you. With RAM in the name, you know the RAM Multi-Pad™ can be easily attached to a wide variety of RAM mounting solutions.
The RAM-HOL-TAB11 consists of a spring loaded back plate, custom support cups and Uni-Conn docking connector for the factory lightning connector. The Uni-Conn docking connector enables the use of the factory iPad cables with docking connector for charging as well as other functions. Also works with most aftermarket cables and or modules with docking connectors.
Get the most out of your tablet with the RAM Tab-Tite™. The spring loaded design makes it easy to insert and remove your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended.
The RAM-B-101, powder coated marine grade aluminium mount, consists of a double socket arm mount with two 2.5" diameter round bases with the universal AMPS hole pattern. Rubber 1" ball and socket technology dampens shock and vibration, as well as allowing for almost infinite adjustment and perfect viewing angles. For most applications the mount will support up to 1.5kg.
The RAM twist lock suction cup mount consists of a 3.25" suction cup locking base with a 1" ball attached, a double socket arm and a round plate with drilled hoes including the universal AMPS hole pattern.
The RAM-B-201-A, short double socket arm, has a socket at both ends that accommodates 1" ball bases. This socket technology allows for almost infinite adjustment and perfect viewing angles.
The RAM-B-238U consists of a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles.
The RAM-B-224-1U consists of a 3.25" twist lock suction cup base that is connected to the RAM-B-238U diamond base with 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth, non-porous surface. For best results mount the suction cup on glass or non-porous plastic surface.
The RAM-B-201-C, long double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
The RAM-B-201, standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
The RAP-B-378U consists of a 2.5" composite base that connects to a 1" ball, double-sided adhesive PSA stick pad and sealed alcohol prep pad. This base will attach to all RAM double socket arms that will accommodate 1" ball bases.
The RAM-B-272U consists of a 1" diameter ball and base with 9mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-272U is BMW.
The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".
The RAM-B-166U consists of a double socket arm, 3.25" suction cup twist lock base and diamond base adapter. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks.
The RAM-B-108BU consists of a 1" diameter rubber ball connected at a right angle to a v-shaped base. The RAM-B-108BU accommodates rails from 1.0" to a maximum of 2.1" in diameter. To mount the RAM-B-108BU base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail.
The RAM-B-224-1U consists of a 3.25" twist lock suction cup base that is connected to the RAM-B-238U diamond base with 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth, non-porous surface. For best results mount the suction cup on glass or non-porous plastic surface.
This mount consists of a 3.25" twist lock suction cup base, double socket arm and a universal spring loaded X-Grip II™ holder for 7" tablets. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks.
The RAM X-Grip II™ has a clean and clever four leg design that sports great holding power without hiding your tablet behind foam pads and plastic. The perfect compliment to the modern sleek design of tablets, the RAM X-Grip II™ is the tablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant universal holder is ready to compliment your tablet.
The RAM-B-202 consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
The RAM-B-259U is designed to mount to the lip edge of a flat surface up to 1" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplane. The base has two composite bolts that, when tightened, clamp the base to the lip surface.