Search
Filters
Close
Free delivery

RAM-HOL-GA7 Mount for Garmin 196/296/496

Includes RAM-HOL-GA7U holder for Garmin GPSMAP 176, 176C, 196, 276C, & 296-series GPS
SKU: RAM HOL GA7U MOUNT
Manufacturer: RAM
$25.00
Includes RAM-HOL-GA7U holder for Garmin GPSMAP 176, 176C, 196, 276C, & 296-series GPS

Compatible with all 1" RAM receptacles.

The RAM High Strength Plastic Cradle is designed to hold the following GPS units,
• Garmin GPSMAP 176
• Garmin GPSMAP 176C
• Garmin GPSMAP 196
• Garmin GPSMAP 276C
• Garmin GPSMAP 296

All cables can stay connected to the unit while in the RAM cradle.

PLACING YOUR GPS INTO THE CRADLE:
Place the knob of the smaller side arm of the RAM cradle into the hole in the back of the GPS. Now slide the larger arm around the edge of the GPS unit until the end of the arm 'clicks' into place at the front edge of the GPS unit.

INCLUDED WITH THE CRADLE:
The cradle includes a set of two nuts and bolts (RAM-S-HOL) to connect the cradle to any of the RAM compatible mounts.

PICTURE GALLERY:
This series of pictures shows the RAM-HOL-GA7 holding a Garmin GPS, connected to a RAM-B-238 Aluminum Diamond Plate with 1'' Ball and RAM-B-201 Aluminum Double 1'' Socket Standard Length Arm

IMPORTANT MOUNTING INFORMATION:
One RAM-B-238 Diamond Base Plate with 1-inch diameter ball mount (sold separately) and is required for attachment of all RAM GPS holders to any RAM mount system.

In addition, you will also need a RAM base with 1"-diameter ball (i.e., RAM-B-202 or RAM-B-231) and at least one RAM-B-201 extension arm.

All RAM components are sold separately.
Includes RAM-HOL-GA7U holder for Garmin GPSMAP 176, 176C, 196, 276C, & 296-series GPS

Compatible with all 1" RAM receptacles.

The RAM High Strength Plastic Cradle is designed to hold the following GPS units,
• Garmin GPSMAP 176
• Garmin GPSMAP 176C
• Garmin GPSMAP 196
• Garmin GPSMAP 276C
• Garmin GPSMAP 296

All cables can stay connected to the unit while in the RAM cradle.

PLACING YOUR GPS INTO THE CRADLE:
Place the knob of the smaller side arm of the RAM cradle into the hole in the back of the GPS. Now slide the larger arm around the edge of the GPS unit until the end of the arm 'clicks' into place at the front edge of the GPS unit.

INCLUDED WITH THE CRADLE:
The cradle includes a set of two nuts and bolts (RAM-S-HOL) to connect the cradle to any of the RAM compatible mounts.

PICTURE GALLERY:
This series of pictures shows the RAM-HOL-GA7 holding a Garmin GPS, connected to a RAM-B-238 Aluminum Diamond Plate with 1'' Ball and RAM-B-201 Aluminum Double 1'' Socket Standard Length Arm

IMPORTANT MOUNTING INFORMATION:
One RAM-B-238 Diamond Base Plate with 1-inch diameter ball mount (sold separately) and is required for attachment of all RAM GPS holders to any RAM mount system.

In addition, you will also need a RAM base with 1"-diameter ball (i.e., RAM-B-202 or RAM-B-231) and at least one RAM-B-201 extension arm.

All RAM components are sold separately.
Customers also bought

RAM B 238U

The RAM-B-238U consists of a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles.
$20.00

RAM BASE 201 SOCKET ARMS REGULAR

The RAM-B-201, standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
$30.00